GST5000 Intelligent Fire Alarm Control Panel
Installation and Operation Manual (Generic Part)
The Intelligent Solution
Page 14
lower than 160VAC. The buzzer will alarm at the same time.
BATTERY FAULT LED: Yellow. Lit when battery voltage is lower than 15VDC
or higher than 28VDC. The buzzer will alarm at the same time.
OVERLOAD LED: Red. Lit when battery voltage is higher than 28VDC. The
buzzer will alarm at the same time.
OUTPUT FAULT LED: Yellow. Lit when a break or short circuit occurs or output
current is higher than 8A. The buzzer will alarm at the same time.
MUTE LED: Red. Lit when in mute state.
Display windows indicate the input AC voltage, output voltage and output
current.
B Terminals
Back of the PSU and terminals are shown in Fig. 3-9.
220V
AC
3.15A
INTERNAL
OUTPUT
BAT. FUSE
OFF
OFF
BATTERY
BAT.
EXTERNAL
OUTPUT
OUTPUT FUSE
10A
ON
ON
-
+
GND
+24V
10A
GND
+24V
Fig. 3-9
AC ON/OFF: AC ON applies AC power, and AC OFF disconnects AC power.
BATTERY ON/OFF: BATTERY ON applies battery, and BATTERY OFF
disconnects battery.
+, - (BAT.): Battery input.
+24V, GND (EXTERNAL OUTPUT): 24VDC main output.
+24V, GND (INTERNAL OUTPUT): 24VDC multi-wire power output.
AC socket: 220V/230VAC power input (including chassis earth).
3.3.2 Optional Configuration
(1) Fireman’s Control Panel (FCP)
Fireman’s Control Panel is an important device in the system. These devices include
fire pump, smoke exhauster and blower. The FCP of GST5000 intelligent fire alarm
control panel can control at most 12 equipments by option. For devices needing both
start and stop, it can control at most 6. The panel can check short circuit and broken
circuit with corresponding audio and visual instruction, which can ensure the reliability of
connection between the control panel and important devices as much as possible.
(2) Thermal Printer
The thermal printer adopts special structure to be installed on a small mounting hole
Summary of Contents for GST5000
Page 1: ......
