GSSI SIR 20, User Manual

Page: 30 / 100

Geophysical Survey Systems, Inc. SIR® 20
Manual
MN92-078 Rev F 24
Figure 21: Project File Name box.
2
Enter a project file name in the white box that is labeled File Name: Remember to keep the name less
than 8 characters. Alphanumeric values are acceptable. Do not use any symbols.
•
We are only collecting 2D data now, so do not click the button that says Collect 3D Data Set.
•
Click Next >. This will open a new window with the heading Review Project Information
(Figure 22).
Figure 22: Project Information dialog box.
3
Enter information to describe your project area. You can give the project a Title, Start/Finish time and
add Notes.
•
Note the gray button for Output Path. This is the location where the SIR 20 will store your data
files. This location was set by you in View > Customize.
•
All data entry on this screen is optional. If you do not wish to add notes, click Next >.
A window will open with the heading Data Collection Mode (Figure 23).