CHAPTER 10 LAN / GPIB / RS-485 COMMAND INTRODUCTION
74
10-4-11. SYSTem:COMMunicate:LAN:SMAS COMMAND
Syntax:
Short Form: SYST:COMM:LAN:SMAS "<address>"
Long Form: SYSTem:COMMunicate:LAN:SMAS "<address>"
Description:
Set the Subnet MASK address
Argument:
"<address>" is text format in xxx.xxx.xxx.xxx
Example:
Example: SYST:COMM:LAN:SMAS 255.255.0.0 Set 255.255.255.0 is a typical subnet
MASK address
10-4-12. SYSTem:COMMunicate:LAN:SMAS? QUERY
Syntax:
Short Form: SYST:COMM:LAN:SMAS?
Long Form: SYSTem:COMMunicate:LAN:SMAS?
Description:
Query the Subnet MASK address
Return Format:
"<address>"
Example:
SYST:COMM:LAN:SMAS?
Read the DC power’s Subnet MASK 255.255.0.0 is a typical
default IP address
10-4-13. SYSTem:COMMunicate:LAN:MAC? QUERY
Syntax:
Short Form: SYST:COMM:LAN:MAC?
Long Form: SYSTem:COMMunicate:LAN:MAC?
Description:
Query the MAC address
Return Format:
<string>, text format in 70-46-42-xx-xx-xx
Example:
SYST:COMM:LAN:MAC? Read the MAC address. 70-46-42-xx-xx-xx is a typical default IP
address
10-4-14. SYSTem:COMMunicate:LAN:TELNet:PORT COMMAND
Syntax:
Short Form: SYST:COMM:LAN:TELN:PORT <NR1>
Long Form: SYSTem:COMMunicate:LAN:TELNet:PORT <NR1>
Description:
Set the Telnet Command Port. Use a Telnet session to transfer commands and read
responses over a TCP/IP network. PR/PD/HR series uses LAN port 5025 for Telnet
sessions. A Telnet session can typically be started as follows from a host computer shell.
For example: telnet 192.168.0.100 5025
Argument:
<NR1> is text format in 0~65535
Example:
SYST:COMM:LAN:TELN:PORT 5025 Set the TCP/IP port to 5025, you may control the
DC power by using SCPI command under telnet address 192.168.0.100:5025
10-4-15. SYSTem:COMMunicate:LAN:TELNet:PORT? QUERY
Syntax:
Short Form: SYST:COMM:LAN:TELN:PORT?
Long Form: SYSTem:COMMunicate:LAN:TELNet:PORT?
Description:
Query the Telnet Command Port.
Return Format:
<NR1>
Example:
SYST:COMM:LAN:TELN:PORT? Read
the DC power’s telnet prot ,
Summary of Contents for Protek PD Series
Page 21: ......
