CHAPTER 8 OPERATION INTRODUCTION
49
8-7-12. DHCP (DHCP function ON/OFF control)
The default of DHCP is set to ON, the IP will be assigned by the DHCP server. Please set the DHCP to OFF (Refer
to 8-7-12) if there is not a DHCP server available and set the IP manually (Refer to 8-7-13). You can also view the
present IP address in the front panel (Refer to 8-7-14~8-7-17), or you may reset the IP to the default 192.168.0.100
(Refer to 8-7-42).
Set the acceptance of IP address assignment from DHCP server to ON/OFF.
(1) Turn the Encoder to select to this DHCP section, press ENTER key to access
and turn the Encoder to select ON/OFF. Press enter key to confirm.
(2) Set this function to ON when connected the network through the network
server. The IP address will be assigned by the server.
(3) Set this function to OFF when connected the PC directly to the DC power supply.
Summary of Contents for Protek PD Series
Page 21: ......
