CHAPTER 8 OPERATION INTRODUCTION
50
8-7-13. DNS (DNS function ON/OFF control)
Set the acceptance of DNS server address assignment from DHCP server to ON/OFF.
(1) Turn the Encoder to select to this DNS section, press ENTER key to access and turn the Encoder to select
ON/OFF. Press enter key to confirm.
(2) Set this function to ON when connected the network through the network server. The DNS server address will
be assigned by the server.
(3) Set this function to OFF when connected the PC directly to the DC power supply.
8-7-14. Set / View the 1
st
IP address
To ensure the setting of address ( including IP, net mask, gateway and DNS address) correctly, it is required to
complete the setting of whole address ( i.e. S.IP1~S.IP4) before leave from the setting.
It indicates the 1
st
IP address which assigned by the server when DHCP ON.
The IP address has 4 numbers and each of them can be set from 1~223.
For example the IP address: xxx.xxx.xxx.xxx
This S.IP1 function is to set the IP address to 192.xxx.xxx.xxx.
8-7-15. Set / View the 2
nd
IP address
Select to S.IP2 and press ENTER key to access. Turn the Encoder to change the number and then press enter key
to confirm. It indicates the 2
nd
IP address which assigned by the server when DHCP ON.
The IP address has 4 numbers and each of them can be set from 1~254.
For example the IP address: 192.xxx.xxx.xxx
This S.IP2 function is to set the IP address to 192.168.xxx.xxx.
Summary of Contents for Protek PD Series
Page 21: ......
