CHAPTER 9 INTERFACE CONNECTION
63
9-4-8. Introduction of Network Configuration
There are five sections in the
“Network Configuration”,
(1) Setting of Host Name and enable/disable mDNS Discovery.
(2) Setting of IP Address, the IP address will be assigned by the DHCP server if the
“DHCP+AutoIP” is selected.
(3) Setting of DNS Server Address.
(4) Setting of Socket Port when using the Hyper Terminal, the default value is 5025.
(5) Loading the default settings.
9-4-9. Introduction of instrument control
There is a control screen for the basic controls of PR/PD series.
(1) Displaying the measured voltage value when OUTPUT ON.
(2) Displaying the measured current value when OUTPUT ON.
(3) Setting for output voltage.
(4) Setting for output current.
(5) The status indication of DC power, the blue dot indicated the present status of DC power.
(6) OUTPUT ON/OFF.
(7) RESET, set the voltage and current to default value and OUTPUT OFF.
Summary of Contents for Protek PD Series
Page 21: ......
