CHAPTER 8 OPERATION INTRODUCTION
53
8-7-23. Set / View the 2
nd
Gateway address
Select to S.GW2 and press ENTER key to access. Turn the Encoder to change the number and then press enter
key to confirm. It indicates the 2
nd
gateway address which assigned by the server when DHCP ON.
The gateway address has 4 numbers and each of them can be set from 1~254.
For example the gateway address: 192.xxx.xxx.xxx
This S.GW2 function is to set the gateway address to 192.168.xxx.xxx.
8-7-24. Set / View the 3
rd
Gateway address
Select to S.GW3 and press ENTER key to access. Turn the Encoder to change the number and then press enter
key to confirm. It indicates the 3
rd
gateway address which assigned by the server when DHCP ON.
The gateway address has 4 numbers and each of them can be set from 1~254.
For example the gateway address: 192.168.xxx.xxx
This S.GW3 function is to set the gateway address to 192.168.0.xxx.
8-7-25. Set / View the 4
th
Gateway address
Select to S.GW4 and press ENTER key to access. Turn the Encoder to change the number and then press enter
key to confirm. It indicates the 4
th
gateway address which assigned by the server when DHCP ON.
The gateway address has 4 numbers and each of them can be set from 1~254.
For example the gateway address: 192.168.0.xxx
This S.GW4 function is to set the gateway address to 192.168.0.100.
Summary of Contents for Protek PD Series
Page 21: ......
