Sinio DTR 6110 S / 6111 S CI
Allgemeiner Teil / General Section
GRUNDIG Service
1 - 17
ENGLISH
61
ADJUSTING THE SATELLITE RECEIVER
___________________________________
6
Select the »Low A « row using the »
Ǹ
,
Ƿ
, P+, P-
« buttons, activate it
using the »
OK
« button, enter the oscillator frequency as 5 digits using the
numeric buttons »
1 … 0
«, and finally confirm with »
OK
«.
7
Select the »High A « row using the »
Ǹ
,
Ƿ
, P+, P-
« buttons, activate it
using the »
OK
« button, enter the oscillator frequency as 5 digits using the
numeric buttons »
1 … 0
«, and finally confirm with »
OK
«.
8
Select the »Low B « row using the »
Ǹ
,
Ƿ
, P+, P-
« buttons, activate it
using the »
OK
« button, enter the oscillator frequency as 5 digits using the
numeric buttons »
1 … 0
«, and finally confirm with »
OK
«.
9
Select the »High B « row using the »
Ǹ
,
Ƿ
, P+, P-
« buttons, activate it
using the »
OK
« button, enter the oscillator frequency as 5 digits using the
numeric buttons »
1 … 0
«, and finally confirm with »
OK
«.
10
Select the »Select Satellites« row using the »
Ǹ
,
Ƿ
, P+, P-
« buttons, and
then confirm with »
OK
«.
– The »Assign Satellite« menu appears on the picture screen.
11
Select the desired satellite using the »
Ǹ
,
Ƿ
, P+, P-
« buttons then
confirm with »
OK
«.
– The »Edit Satellite« menu appears on the picture screen.
12
Activate the highlighted »DiSEqC switch« row using the »
OK
« button.
– A dialogue box appears on the picture screen.
13
Select the appropriate satellite assignment using the »
P+, P-
« buttons then
confirm with »
OK
«.
14
Press »
Z
« to return to the »Assign Satellite« menu, or
press »
Ǻ
Menu
« to end the settings.
LNB Settings
Exit
Back
0 9750 MHz
Low A
LNB Type
0 9750 MHz
Low B
10600 MHz
High A
10600 MHz
High B
4
1
Select Satellites
Edit Satellite
Exit
Back
Name
DiSEqC Switch
EutelSat 13° O
B
62
COMMON INTERFACE
_________________________________
The satellite receiver’s interface for the reception of
scrambled satellite services
The Common Interface (C I) is an interface for digital satellite receivers (also
called SET-TOP boxes):
This interface serves for connecting a CA module (CA = Conditional Access)
available for various scrambling systems.
Scrambled satellite services can only be received with the help of a CA module
which complies with the scrambling system, in connection with a corresponding
smart card.
The smart cards comprise the data for the access authorization to the
scrambled services of the provider from which the card has been purchased.
Please contact the Pay-TV provider you are interested in for more information.
With the satellite receiver DTR 6111 S CI in connection with CA modules, you can
receive all free and certain scrambled satellite services.
The satellite receiver DTR 6111 S CI is provided with a Common Interface
compartment for two CA modules in its front panel.
Insert the smart cards which you have purchased from a pay TV provider into
the CA modules to get access to the desired scrambled satellite services.
Important!
Only you are responsible for the use of the smart card.
When not used, keep your smart card and your PIN code in a safe place.
Observe also the user instructions of the Pay-TV provider.
Only with the
DTR 6111 S CI
