Allgemeiner Teil / General Section
Sinio DTR 6110 S / 6111 S CI
1 - 16
GRUNDIG Service
ENGLISH
21
BASIC SETTINGS
________________________________________________________________________
4
Select the setting »RGB« or »CVBS« required for your TV set using the
»
P+, P-
« buttons, then confirm with »
OK
«.
5
Select the »Picture Format« menu row using the »
P+, P-
« buttons, then
confirm with »
OK
«.
Note:
TV programmes are boradcast with the 4:3 or 16:9 picture format.
The satellite receiver recognizes automatically these formats and processes
them accordingly.
6
Select the »4 : 3« or »Auto « setting for your TV set using the »
P+, P-
«
buttons, then confirm with »
OK
«.
Note:
If you select the »Auto « setting, the »Letterbox« row disapears.
The TV set (16: 9) is automatically provided with the correct picture
format.
7
If applicable, select the »Letterbox« row using the »
P+, P-
« buttons, then
confirm with »
OK
«.
8
Select »On« or »Off« using the »
P+, P-
« buttons, then confirm with »
OK
«.
9
Press »
Z
« to return to the »System Setup« menu, or
press »
Ǻ
Menu
« to end the settings.
AV Setup
Exit
Back
TV
Picture Format
Letterbox
CVBS
4:3
Off
AV Setup
Exit
Back
TV
Picture Format
Letterbox
CVBS
4:3
On
60
ADJUSTING THE SATELLITE RECEIVER
___________
Adjusting the satellite receiver to the satellite antenna
and the LNB configuration
In order to adjust the satellite receiver in an optimum way to the different antenna
systems, four LNB configurations are available.
Note:
Your antenna technician or specialized dealer which has installed your
antenna system will be glad to provide you with detailed information about
all settings required.
Important!
For every setting you want to use you must enter the oscillator frequencies
(low and high) of the LNBs into the »LNB setup« menu.
The number of the possible oscillator frequencies depends on the selected
LNB configuration.
To ensure the reception of services of different satellites, different switching sig-
nals are emitted when selecting another satellite service in order to select the
required LNB along with its frequency in a unique way.
1
Call up the »Main Menu« on the picture screen using the »
Ǻ
Menu
« button.
2
Select the »System Setup« row using the »
P+, P-
« buttons, and then
confirm with »
OK
«.
3
Select the »LNB Settings« row using the »
P+, P-
« buttons, and then confirm
with »
OK
«.
4
Select the »LNB Type« row using the »
P+, P-
« buttons, and then confirm
with »
OK
«.
5
Select the appropriate LNB Type, depending on the satellite antenna and the
LNB, LNB Type 4 in the example, using the »
P+, P-
« buttons, and then
confirm with »
OK
«.
LNB Settings
Exit
Back
0 9750 MHz
Low A
LNB Type
0 9750 MHz
Low B
10600 MHz
High A
10600 MHz
High B
4
Select Satellites
