ENGLISH
76
RESET FUNCTIONS
----------------------------------------------------------------------------------------
1
Open menu with »
MENU
« button.
2
Select menu item »Settings« with »
V
«, »
Λ
«,
»
<
« or »
>
« and press »
OK
« to confirm.
3
Select the menu item »TV« with »
>
« or »
<
«
and press »
OK
« to confirm.
4
Select the line »About« with »
V
« or »
Λ
«
and press »
OK
« to confirm.
Product Info
TV Name
Smart Inter@ctive 4...
Software Updates
Restore Factory Defaults
Reset Chanel History
Country
Other
Picture
Tuesday
xx xxx xxxx
Source
Timer
Sound
Network
TV
Parental
Settings > TV > About
Change Area
Select
Exit
Back
BACK
EXIT
Note:
7
Additional operations are explained in the
following sections.
Resetting the television to its
original state
This function enables you to delete the station
lists and all custom settings.
1
From the »About« menu use »
V
« or »
Λ
«
to select the line »Restore Factory Defaults«
and press »
OK
« to confirm.
– Warning screen will be displayed.
Note:
7
If the loaded applications are also to be
deleted, select the line »Save installed
applications« by pressing »
Λ
« and remove
the small tick with »
OK
«.
2
Select push button »Yes« with »
<
« or »
>
« to
confirm the security query;
or
select push button »No« with »
<
« or »
>
« to
cancel deletion process.
– In a short while »Installation Guide« is
displayed.
3
Continue the settings as described in the
chapter on first installation and searching
for channels on page 20.
Deleting channel history
This function allows you to delete channel his-
tory stored in the Main menu.
1
From the »About« menu use »
V
« or »
Λ
« to
select the line »Reset Channel History« and
press »
OK
« to confirm.
– Warning screen will be displayed.
2
Select push button »Yes« with »
<
« or »
>
« to
confirm the security query;
or
select push button »No« with »
<
« or »
>
« to
to cancel the function.
3
Press »
BACK
<
« to go back one menu
level or press »
EXIT
« to end the setting.
87
ENGLISH
Wired network settings
There are two ways of making the wired net-
work settings.
A
Automatic
connection,
All data regarding connection settings (»IP
Address«, »Netmask«, »Gateway« and
»DNS«) are obtained from modem auto-
matically.
B
Manual
connection,
all data regarding connection settings (»IP
Address«, »Netmask«, »Gateway« and
»DNS«) must be configured manually.
Automatic connection
Most of the home networks are Dynamic. If
you have a dynamic network, you must use a
DSL modem that supports DHCP. Modems and
IP sharers that support DHCP obtain the »IP
Address«, »Netmask«, »Gateway« and »DNS«
values required for internet access automatical-
ly, and thus you are not required to enter those
values manually.
1
Open the menu with »
MENU
«.
2
Select menu item »Settings« with »
V
«, »
Λ
«,
»
<
« or »
>
« and press »
OK
« to confirm.
3
Select the menu item »Network« with »
>
« or
»
<
« and press »
V
« to confirm.
– »Network« menu is active.
Picture
Tuesday
xx xxx xxxx
Source
Timer
Sound
Network
TV
Parental
Settings > Network
Change Area
Connect
Test Connection
Select
Zurück
BACK
Change Connection Type
Wired
Network Configuration
AUTO
Wake-on-LAN
Off
Advanced
4
Select the line »Change Connection Type«
»
V
« or »
Λ
« and press »
OK
« to confirm.
5
Select the option »Wired« with »
V
« or »
Λ
«
and press »
OK
« to confirm.
NETWORK SETUP
-------------------------------------------------------------------------------------------
6
Select the line »Network Configuration«
with »
V
« or »
Λ
« and use »
<
« or »
>
« to
select »AUTO«.
7
With »
y
« (red) select »Connect« to establish
modem connection.
– »Connecting ... Please wait« message
will be displayed, and if the connection
is established »Connection To Gateway:
Success« message will be displayed.
8
Press »
yy
« (green) to check the performed
settings and also if the local network and
internet connection has been established.
– »Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
message will be displayed.
9
Press »
EXIT
« to end the settings.
Note:
7
If you do not have a dynamic network,
follow the instructions in manual connection
section.
Chassis G5
GR
UNDIG Ser
vice
1 - 41
