Grundig GV 940 NIC, User Manual

Page: 35 / 44

ENGLISH
35
Channel programming with the manual tuning
system or by entering the channel numbers manually
If you do not know the channel/special channel numbers of the TV stations you
wish to programme, or if the recorder could not find a TV station with the help of
the automatic tuning system, you can use the manual search for programming.
If you know the channel/special channel numbers of the TV stations you wish to
programme, you can enter this data also directly.
Preparation
Switch the TV set on.
Select the »AV« programme position for video playback on the TV set.
Setting
1
Call up the main menu with the »
i
INFO « button.
2
Select the » INSTALLATION « line using the »
C C
« or »
D D
« button then activa-
te it with the » OK « button.
3
Select the » CHANNEL PRESET « line using the »
C C
« or »
D D
« button then
activate it with the » OK « button.
4
Activate the » MANUAL TUNING« line with the » OK « button.
– The table for channel programming appears on the picture screen.
The »PRESET« line is marked.
5
Use the » 0… 9 « buttons to select the programme position on which the new
TV channel is to be stored.
6
Select the » CHANNEL« line using the »
C C
« or »
D D
« button.
7
Start the channel search with the » F F « or » E E « button.
– The channel search is stopped as soon as a TV channel is found,
or
enter the channel number with two digits using the »
0 … 9 « buttons.
Use the » MONITOR « button to toggle between normal channels
(display: » C «) or special/hyper channels (display: » S «).
8
If finetuning is required, select the » FINETUNING« line with the »
C C
« or
»
D D
« button then use the » F F « or » E E « button for finetuning.
9
Store the setting for this programme position with the » OK « button.
If you wish to programme further channels, repeat the steps 5 to 8 .
10
End channel programming with the » i INFO « button.
SPECIAL SETTINGS
____________________________________________________________________
■
➔ PRESET ARD 1
CHANNEL C 06
FINE TUNING
r e
DECODER ON OFF
SKIP ON OFF
w q
:SELECT
r e
:CHANGE
OK :ENTER INFO:EXIT