ENGLISH
11
Switching the video recorder on and off
(energy-saver mode)
1
Switch the video recorder on with the »
■
« button.
2
Switch the video recorder to standby with the »
88
« button.
– The video recorder is now in standby and the time is visible in the
display.
3
Switch off with the »
88
« button.
– The video recorder is now switched off and the time indication goes out. The
power consumption falls below 2 W.
Note:
The video recorder cannot be switched off if recordings are programmed.
Inserting batteries into the remote control
1
Press the catch and remove the cover from the battery compartment.
2
Insert the batteries (Mignon type, e.g. UM-3 or AA, 2 x 1.5 V). Observe the
polarity marks on the bottom of the battery compartment.
Note:
If your recorder no longer responds correctly to the remote control com-
mands, the batteries may be exhausted. Exhausted batteries must be remo-
ved.
The manufacturer cannot be held responsible for damage resulting from
battery leakage.
Environmental protection
The remote control batteries, even those containing no heavy metals, do not
belong in the household waste. Used batteries can be disposed of for recyc-
ling at most specialized dealers without paying a fee.
CONNECTING AND PREPARATION
_______________________________________
