12
SETTINGS
____________________________________________________________________________
Adjusting the TV set to the video recorder
This adjustment is not necessary if the video recorder and the TV set are con-
nected with a EURO-AV cable.
Preparation
Switch the TV set on.
Select the »AV« programme position for video playback via the aerial socket.
Consult also the user manual of your TV set.
Note:
The video recorder must be in standby mode (not in the energy-saver mode).
Adjustment
1
On the TV set in the UHF range between channel 21 and channel 69, search
for a “free“ channel on which no TV programme is received (only picture and
sound noise).
– Many TV sets display the channel number.
2
Store the “free” channel number on the TV set.
– For this consult the user manual of the TV set.
3
Press and hold down for about three seconds the »
INFO
« button on the video
recorder.
– »
C H 3 6 R F
« , for example, is displayed on the video recorder.
4
Using the »
*
*
P
Ü
Ü
« buttons, tune through the channels on the video recorder
until the picture from the recorder appears on the picture screen of the TV set.
5
If the picture quality of the “recorder picture” is good, store the setting with the
»
OK
« button.
– The video recorder switches to standby.
Note:
If the quality of the “recorder picture” is poor, or the picture quality of one or
more TV programmes on the TV set gets worse, you must search a different
“free” channel on the TV set. For this, repeat the steps 1 to 5.
