Allgemeiner Teil / General Section
GPS 3
1 - 22
GRUNDIG Service
THE BASICS
________________________________________
Opening picture
The opening picture appears when the ignition is switched on.
Important note
After a few seconds the warning note appears. After you have read the
menu contents, press the
OK
button. Observe the applicable rules of
traffic.
Display
During route guidance Without guidance
Indication of general direction
If you are on the desired route you see this type of display:
09:00
Current time
00h12m
Remaining travel time
y
17km
Current direction and distance to destination
A10 EX.7
Current street name/motorway exit number
Direction and distance to the next guidance point
5.0 km
During setting
Press the
MENU
button to call up the NAVIGATION menu. You can
select a menu point that you need with the arrow buttons of the remote
control. The selected menu will be shown with a dark background. The
navigation system contains the following menus:
SET DESTINATION
ADDRESS
Calls up a list of selections
POI
Select from a list of categories
PREVIOUS DEST.
Call up from list PREVIOUS DESTI-
NATIONS
MEMORY POINT
Call up from MEMORY POINT LIST
HOME
Call up stored HOME
LOCAL POI
Call up from list LOCAL POI
TELEPHONE NUMBER
Call up from list TELEPHONE NUMBER
ROUTE
ROUTE OPTIONS
Select conditions for route
REROUTE
Recalculate route
ROUTE LIST
List of the evaluated roads
WAY POINTS
Enter, change, delete, and check way
points
DEMO
Test drive (demonstration)
SETTINGS
MEMORY POINT
Edit a memory point
LANGUAGE
Select a language
TIME/TYRE CHANGE
Set time/calibrate after a tyre change
GUIDANCE TONE
Guidance tone during navigation on/off
AVERAGE SPEED
Change the average speed for estimating
the time of arrival
CODE NUMBER
Protects against unauthorized use
DELETE DESTINATION
DEL. NEXT WAY POINT
DELETE PRE. DEST.
Delete previous destinations
VOLUME
Volume for announcements in 7 steps or OFF
No verbal guidance in
S
position.
THE BASICS
____________________________________________
THE BASICS
____________________________________________
Setting display brightness, contrast and colour
1
Press the
88
button to switch off the display.
2
Hold down the MENU button for 3 second when switching on.
3
Select »
BRIGHTNESS
« or »
CONTRAST
« from the GRUNDIG
menu and press
OK
.
You can set the brightness separately for daytime and nighttime. For
the nighttime setting, switch on the driving light. You can use
NIGHT INVERSE
to switch between positive or negative display,
respectively (
NIGHT INVERSE ON/OFF
).
Then the information will be shown in bright letters on a dark back-
gound.
4
Set the display brightness and the contrast with the arrow keys
< >
.
Your setting is displayed as a bar.
5
Select »
SAVE
« and press
OK
.
6
With »
RETURN
« you leave the menu.
Coding
You can protect your device against unauthorised use (theft).
1
Press the
MENU
button, select »
SETTINGS
« from the NAVI-
GATION menu and press
OK
.
2
Select »
CODE NUMBER
« from the SETTINGS menu and press
»
OK
«.
You will now see the status display.
3
Select the respective setting and press
OK
.
4
Enter the code number. Select each number with den arrow keys
i
or
u
and press
OK
.
You can correct incorrect entries with the »
BS
« button.
5
Select »
END
« button to end the entering.
