9.10. Network Failure Detection
The Network Failure Detection function allows the IP Camera to ping another IP device (e.g. NVR, VSS, Video
Server, etc.) within the network periodically and generates some actions in case of network failure occurance, for
instance, when a Video Server is somehow disconnected.
Being capable of implementing local recording (through Micro SD card) when a network failure happens, the IP
Camera can be a backup recording device for the surveillance system.
Detection Switch :
Here you can turn the Network Failure Detection on and off.
Detection Type :
Here you can set an IP address that should be pinged in order to detect network failure. Please also set the
interval (in minutes) for this pinging.
Triggered Action (Multi-option) :
The Administrator can specify alarm actions that will take place when Network Failure is detected. All options are
listed as follows:
- Enable Alarm Output 1/2:
Check this item and select the predefined type of alarm output to enable alarm relay output when Network
Failure is detected.
- Record Stream to SD Card:
When you check this item, the alarm-triggered recording will be stored on your Micro SD/SDHC card when
network failure is detected.
The pre-trigger buffer recording function allows users to check what happened to trigger the alarm. The pre-
trigger buffer time range is from 1 to 3 seconds.
47
English
Summary of Contents for GCI-K2795P
Page 2: ......
Page 13: ...11 English ...
Page 14: ...Click on Save to confirm the setting 12 English ...
Page 97: ...95 English ...