Grundig COREMAX M1 PROJECT GM, Service Manual

Page: 74 / 98

ENGLISH 74
SERVICE MENU SETTINGS
-------------------------------------------------------------------
7
OSD Selection menu has "Grundig", "Beko",
"Arçelik" and "OEM" selection. For Grundig
products, "Grundig" is selected. Menu images
vary according to selected brand.
7
GRFset1 (USB RECORDING): This indicates
the television's status of USB recording. In GM-
chassis products, it is selected ON by default. It
will be off in Non-pvr products.
7
The Remote Control: GRUNDIG and other
OSD can support several different models of re-
mote controls and all those models can be seen
under the menu. Selection of remote control may
vary according to the customer demand.
7
Operator Selection: Approved operators are
selected as "Avail" and others as "Navail".
7
CEC: This feature allows you to make an
HDMI connection between your TV and DVD
player, satellite receiver or video recorder and
control such equipment with the remote control
of the television. The products with G7 chassis
have CEC feature as standard.
7
Speaker Output Power: Allows selecting
speaker output power. Speaker output power
must be selected "10W@8ohm 24V" on LedART
43", 49'', 55'' products; "7W@8ohm12.5V"
on 32" products; "8W@6ohm 12.5V" on
LUNA 40", 43" products; "8W@6ohm 24V"
on 50" products; "6W@6ohm 12.5V" on 32"
products; "3W@6ohm 12V" on 24" products;
"7W@8ohm 12.5V" on CRYSTAL 32" prod-
ucts; "10W@8ohm 13.5V" on 40" products;
"10W@8ohm 24V" on 43" products.
7
Optical Out (Digital Optical Audio Output):
This feature is generally used to input digital
audio to devices such as amplifier, DVD and etc.
Optical out must be set to ON by default in GM
chassis products.