GRUNDFOS
INSTRUCTIONS
www.grundfos.co.uk
Page 15 of 35
8.10 Wall fixing dimensions
All
FireSAFE
units
must be installed with the unit orientated such that the pump is in the
horizontal plane. The
FireSAFE
unit should be stood on a solid surface that will not transmit the
small amount of vibration that the rotation of the pump will generate.
The
FireSAFE
unit
can be stood on another surface providing vibration insulation is used.
The
CM3
and
CM5
FireSAFE
units are designed with the possibility of wall mounting.
The wall will need to be a suitable load bearing wall. Fixings are not supplied with the unit and
consideration should be given to vibration insulation between the unit and the wall.
The wall mounting hole dimensions are given in the below figure. The unit should be fitted
with the minimum of spacing of 50 cm all around and in front for Service.
Figure 7
