GRUNDFOS
INSTRUCTIONS
www.grundfos.co.uk
Page 12 of 35
8.0 General information
8.1 Delivery and handling
The
FireSAFE
unit is supplied from the factory in a cardboard box which will be
mounted on a wooden pallet suitable for handling by forklift equipment.
The weight and size of the
FireSAFE
unit may require the use of proprietary lifting equipment
in order to be handled safely. Please observe the weight indicated on the box label before
selecting lifting method. Do not stack items on top of the box. Do not drop the pallet.
The weight of the unit can also be found in the
Product range – Weights
section.
8.2 Delivery inspection upon receipt
The
FireSAFE
should be immediately unpacked and inspected.
Any damage must be reported to the supplier within seven days in writing.
It is important that this Installation and Operating manual is studied carefully before
any installation takes place. The installation and operation should also be in
accordance with local regulations and accepted codes of practice.
Under no circumstances should the unit be operated until correctly installed in the
system pipework and ensure that the controller box cover and product cover are
secured in their appropriate positions.
8.3 Warranty
1.
The Grundfos warranty covers all defects within the
FireSAFE
originating from faulty
workmanship and/or materials for a period of two years from the date of installation or
thirty months from the date of despatch from the factory, whichever is the shorter.
2.
The warranty covers the replacement of any faulty parts and our labour cost to replace the
faulty parts. It does not cover the cost of removing, returning and refitting the
FireSAFE
unit
or any secondary losses arising from the failure.
3.
Under no circumstances should faulty equipment be dismantled. Failure to comply with this
instruction could invalidate the warranty.
4.
Defects arising from incorrect installation, water containing debris, or harmful chemicals,
inadequate electrical protection, faulty ancillary equipment, lightning or other circumstances
beyond our control, are not covered by the warranty.
8.4 Site storage
It is strongly recommended once the
FireSAFE
unit has been delivered to site, that it is placed
immediately into a dust, moisture and frost-free area which has been secured to prevent
unauthorised interference. If this is not possible then the unit should be stored in an area
which is as near as possible to the ideal storage conditions as described above.
