Water Softener
WINNI-mat
®
VGX
Order no. 215 188 040-inter Edited by: KONS-pha-rg G:\BA-188040-INTER-VGX.DOC
23
Make the waste water connection according to DIN EN 1717.
In order to do so, shorten the rinsing water hose to the required
length and direct it to the drain.
Make sure there is a free outlet (min. 20 mm) to the drain. Fasten the
hose with appropriate means in order to prevent the hose from wag-
ging. (emerging regeneration water is under pressure).
Fig. D-3: Drain connection of rinsing water hose with and without drain connection DN 50 acc. to DIN EN 1717
for small-scale water softeners (order no. 187 840)
Attention!
Risk of damage and malfunctions due to improper dis-
charge of the waste water. Therefore, do not bend the hose and do
not lead it higher than the system.
Shorten the overflow hose of the brine tank to the required length,
route it descending to the drain and fasten it according to DIN EN
1717.
Fig. D-4: Drain connection of overflow hose of brine tank with and without drain connection DN 50 acc. to
DIN EN 1717 for small-scale water softeners
(order no.. 187 840)
