Grunbeck GENO-UV 120 S, Operation Manual

Page: 13 / 16

Maintenance - Customer Service Section
GENO ® UV systems with GENO ® -Multi BS
Order no. 034 523 950-gb Edited by: KONS-mhug-mrie G:\BA-523950-GB_KD-H.DOC -CONFIDENTIAL-
H-5
H Maintenance - Customer Service Section
(GENO
®
UV systems with GENO
®
-Multi BS)
Contents
1 Overview of service and maintenance work .................
2 Calibration of the system sensor ..................................
3 Resetting ......................................................................
H-5
H-7
H-8
1 | Overview of service and maintenance work
1.1 Overview of service work (every 4,500 operating hours)

Check UV system sensor and calibrate, if necessary

Check sensor shell and replace, if necessary

Check lamp plug and replace, if necessary

Check seals and replace, if necessary

Check functioning of the safety device

Check functioning of a possibly existing rinsing valve

Rinse UV disinfection system, if required

Clean protective pipes, if necessary

Record all data and work performed, including repair work, in
the operation log.

Turn over the system and operation log to operator.
1.2 Overview of maintenance work (every 365 days of operating duration or every 9,000
operating hours)

Replace sensor shell
(only applies to hot water (30-70 °C) UV systems).

Replace flow stabilizer
(only applies to hot water (30-70 °C) UV systems)

Record all data and work performed, including repair work, in
the operation log.

Turn over the system and operation log to operator.

Only for UV 200 S: Check the functionality and effectiveness of
the housing fans.