GENO
®
-flushing compressor 1988 K
Order no. 015 151 963-inter Created: KONS-gmei-mrie G:\BA-151963-INTER_GENO-SPUELKOMP-1988_K.DOC
51
Flush out all the heating systems to be cleaned one after the other as
described above.
On conclusion of flushing, disconnect the flushing compressor from
the mains, disassemble the water connections, remove any remaining
water and drain off the condensate on the flushing compressor (also
see chapter 11, point 2, care work).
Refit and check the heating system in a technically correct manner.
Fill the heater as per VDI 2035 (see GENO-therm
®
program) and
commission.
Attention!
If any parts come into contact with heating water (e.g.
connection tubes from the flushing compressor to the inlet flow
connection), these must be cleaned or labelled so that they are no
longer used for flushing drinking water installations.
