Mobile reverse osmosis system
AVRO-flex 400
Order no. 095 752 946-inter Edited by: phar-mrie G:\BA-752946-INTER_095_AVRO-FLEX_400.DOCX
32
2.3 Access to the pro-
gramming levels -
change parame-
ters
1. Simultaneously pressing the buttons P and ▼ (> 1 sec) causes the
code request C 000 to appear.
2. Set the required code with buttons ▼ or ▲ and confirm with P but-
ton.
3. Within the programming level, select the desired parameter with
buttons ▼ or ▲and open it for editing with the P button (value starts
flashing).
4. Change the parameter setting to the desired value with buttons
▼ or ▲
.
5. Save the new parameter setting with the P button (value stops
flashing) or reject the change by simultaneously pressing the but-
tons ▼ and ▲, and close the parameter again (value stops flashing,
previous setting remains saved).
6. Return to the basic display time by simultaneously pressing buttons
▼ and ▲.
7. If no button is pressed within a parameter level for more than 5
minutes, the system automatically returns to the basic display time.
Any open parameters (value flashing) are closed and the previously
saved value is kept.
2.4 Software version Code 999
Display
Parameters
P1.25
Software version of RO-matic controller
