Mobile reverse osmosis system
AVRO-flex 400
Order no. 095 752 946-inter Edited by: phar-mrie G:\BA-752946-INTER_095_AVRO-FLEX_400.DOCX
20
6 | Scope of supply
6.1 Standard equip-
ment
Mobile, stand-alone aluminium rack to house all aggregates and
control elements.
Microprocessor controller with LC display, voltage-free collective
fault signal and voltage-free signal contact (maintenance interval,
various pre-warnings), installed in a switch cabinet. Selector switch
for operating modes - filling mode - workshop mode.
Centrifugal pump made of stainless steel with motor as high pres-
sure pump to supply the membrane, incl. control valve for operating
pressure and pressure gauge.
Adjustable pressure switch and diaphragm expansion tank to sup-
ply consumers downstream.
Hydro distributor block for the water supply within the membrane
system. Integrated valves and measuring instruments for easier
system calibration.
Fine filter with integrated pressure reducer, preset to 2.5 bar.
Ultra-low pressure reverse osmosis membranes incl. pressure pipe.
AVRO treatment unit, installed in a pressure pipe made of high-
strength PE.
Flow sensor to measure the volume of the system flows permeate
and concentrate.
Two pressure-resistant, metal fabric hoses and GEKA couplings.
¾" double nipple for connection to a desliQ:BA mixed bed cartridge.
Operation manual.
