manualshive.com logo in svg

Gruetzner LUB-V, User Manual

Share
Download
Gruetzner LUB-V User Manual Download Page 23

23

The  graphic  above  illustrates  the  unchangeable  basic  flowchart  of  the  LUB-V  menu 

navigation as well as the options for branching to submenus.

 LUB-V can be switched on and off at several points in the menu navigation. For details 

see chapter 6.3.3.

 The INF menu can only be accessed from OFF mode (LUB-V is switched off).

The INF menu provides you with an informative overview of the current LUB-V settings. 

For details see chapter 6.3.4.

 The RUN menu can only be accessed from ON mode (LUB-V is switched on).

The RUN menu allows you to manually trigger a single dispense at LUB-V. For details 

see chapter 6.3.6.

 The PRO menu is only accessible from ON mode (LUB-V is switched on).

The PRO menu allows you to make changes to the LUB-V settings - and thus to its 

dispensing behavior. For details see chapter 6.3.7.

 The FIL menu is only accessible from ON mode (LUB-V is switched on).

The FIL menu allows you to manually trigger a fixed number of dispenses at LUB-V. For 

details see chapter 6.3.9.

Summary of Contents for LUB-V





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands