3
4
Safety information contains in this section must be observed at all times when working
on or with batteries. For safety, installers are responsibility to familiarize themselves with
this manual and all warnings before installation.
2.1 Basic security
The PACK has been designed and tested in strict rules with international safety
certification requirements. Read all safety instructions carefully before any work and
obey the rules at all times when working on or with the PACK. Growatt shall not be liable
for any consequence caused by the violation of the following:
Ÿ
Damage occurred during transportation .
Ÿ
Incorrect transportation, storage, installation and use, or customer fails to convey the
Ÿ
correct information about transportation, storage, installation and use to terminal
Ÿ
customers.
Ÿ
Non-professional installation.
Ÿ
Failure to obey the rules of this operation instructions and safety precautions in this
document.
Ÿ
Unauthorized modifications or removal of the software package.
Ÿ
PACK tamper label is damaged or product with any part missing (except the authorized
dissemble parts).
Ÿ
Operate and use in extreme environments not allowed in this document.
Ÿ
Repair, disassemble, or change PACKs without authorization and cause failure.
Ÿ
Damage to shell labels or modifies date of production.
Ÿ
PACK fail to be charge for more than six months.
Ÿ
Damages due to force majeure (such as lightning, earthquakes, fire, and storms).
Ÿ
Warranty expiration.
2.2 Safety Precautions
2.2.1 Environment requirements
Ÿ
Do not expose the battery to temperature above 50
℃
or heat sources.
Ÿ
Do not install or use the battery in wet locations, moisture , corrosive gases or liquids,
such as bathroom.
Ÿ
Do not expose the battery to direct sunlight for extended periods of time.
Ÿ
Place battery in safe place away from children and animals.
Ÿ
Battery power terminals shall not touch conductive objects such as wires.
Ÿ
Do not dispose the batteries in fire, which may cause an explosion.
Ÿ
The PACK shall not come in contact with liquids.
Ÿ
The PACK can only be installed indoors. Regarding indoor installation, please do not
install it in the bedroom, living room, kitchen, etc.
2 Safety
2.2.2 Operation Precautions
Ÿ
Do not touch the PACK with wet hands.
Ÿ
Do not disassemble the PACK without permission
Ÿ
Do not crush, drop or puncture the PACK and battery
Ÿ
Dispose the batteries according to local safety regulations.
Ÿ
Store and recharge battery in accordance with this manual.
Ÿ
Ensure the connection of ground wire reliable.
Ÿ
Remove all metal objects such as watches and rings that could cause a short-circuit
before installation, replacement and maintenance.
Ÿ
The Pack shall be repaired, replaced or maintained by skilled personal that has been
recognized.
Ÿ
When storing or handling batteries ,do not stack batteries without package.
Ÿ
Do not broke the battery, the released electrolyte may be toxic and is harmful to skin
and eyes.
Ÿ
Packaged batteries should not be stacked more than specified number stipulated on
the packing case.
Ÿ
Do not use damaged, failed or deformed batteries, which may lead to high
temperature or even dangerous accidents. Continued operation of damaged battery may
result in electrical shock, fire or even worse.
2.3 Warning Labels/Étiquettes d'avertissement
Symbols/ Symboles
Description
Do not dispose in trash/Ne pas jeter à la poubelle
Lithium ion battery can be recycled/La batterie lithium-ion
peut être recyclée
Certification in European union area/Certification dans la zone
de l'Union européenne
UK certification/Certification britannique
Electric shock hazard/Risque de choc électrique
Explosive gas/Gaz explosif
May leak corrosive electrolyte/Peut fuir un électrolyte corrosif
Heavy enough to cause severe injury/Assez lourd pour causer
des blessures graves
Keep the Pack away from children/Gardez le pack hors de
portée des enfants
Make sure the battery polarity well connected/Assurez-vous
que la polarité de la batterie est bien connectée
