22
Specifications
Carrier
Carrier
Chassis
Parallel box section fabricated from high-strength, low-alloy steel with
integral outrigger boxes, front and rear lift, tie-down, and towing lugs.
Outrigger system
Four hydraulic telescoping single stage double box beam outriggers with
inverted jack cylinders and integral jack holding valves. Three position
settings, 0%, 50%, and fully extended. Polymer outrigger floats 600 mm
diameter. Outrigger Monitoring System (OMS) with in-cylinder sensors.
Outrigger beam position shown on RCL display.
Outrigger controls
Main controls and digital level shown on operating display in cab.
Extension and retraction are through the CCS system as well as the wireless
rigging remote. Includes automatic leveling feature.
Hydraulic system
Two main pumps variable displacement piston and one gear with a
combined output capacity of 507 L/min.
Maximum operating pressure: 276 bar
Return line in-tank filter with full flow by-pass protection and service
indicator. Replaceable cartridge with 4 micron filtration rating per
ISO cleanliness level of 17/15/12. Carrier mounted oil cooler with
thermostatically controlled hydraulic motor driven fan/air to oil. System
pressure test ports.
Engine (Euromot 5)
Cummins B 6.7 L diesel, six cylinders, turbocharged with Diesel Exhaust
Fluid. Meets emissions per E.U. Euromot5. 205 kW at 2500 rpm.
Maximum torque: 990 Nm at 1500 rpm. Fuel requirement: Maximum of
15 ppm sulphur content (Ultra Low Sulphur Diesel Fuel). Note: Euromot
5 engine Required in European Union countries.
Engine (Tier 3)
Cummins B6.7L diesel six cylinder, turbo-charged with 205 kW at
2500 rpm, Maximum torque: 990 Nm at 1500 rpm. Fuel requirements:
Maximum of 5000 ppm sulfur diesel fuel.
Fuel tank capacity
271 L
Transmission
Rangeshift with six forward and six reverse speeds. (Three speeds high and
three speeds low). Front axle disconnect for 4 x 2 drive.
Axles
Front: Drive/steer with differential and planetary reduction hubs rigid
mounted to frame.
Rear: Drive/steer with differential and planetary reduction hubs pivot
mounted to frame. Automatic full hydraulic lockouts on rear axle permits
254 mm of oscillation only with boom centered over the front.
Brakes
Full hydraulic split (dual) circuit dry disc operating on all wheels with
dual calipers. High pressure parking brake is spring applied/hydraulically
released on the front axle input shaft.
Steering
Fully independent power steering.
Front: Fully hydraulic steering wheel controlled.
Rear: Fully hydraulic via separate momentary switch provides infinite
variations 4 steering modes, front only, rear only, coordinated and crab.
Rear steer not aligned indicator.
Outside 4WS coordinated steer radius: 7,5 m.
Inside 4WS coordinated steer radius: 4,8 m.
Tires
29.5 x 25 – 34 bias ply rating.
Electrical system
Two 12 V maintenance-free batteries with disconnect.
24 V system/24 V lighting.
Lighting
Full LED lighting package including turn indicators; head, tail, brake and
hazard warning lights; carrier side mounted work lights and work lights
mounted on cab front.
Maximum Drive Speed
24,1 km/h with counterweight installed.
Gradeability (theoretical)
99% to drive train stall based on 59017 kg GVW with 29.5 x 25 tires,
standard counterweight, auxiliary hoist and manual bi-fold extension.
Miscellaneous standard equipment
Full length aluminum decking, dual rear view mirrors, hook block
tie-down, electronic back-up alarm, covered deck storage compartment, hot
water cab heater/defroster, cab air conditioner, hourmeter, A/V warning
system, combination lift/tie-down/towing lugs, coolant sight level indicator,
hoist access platform, storage boxes on both sides of carrier and cribbing
storage on left side of carrier.
*
Optional equipment
• Auxiliary Hoist Package:
Includes auxiliary hoist with electronic hoist
drum rotation indicator, third wrap indicator with hoist function cut-out,
185 m of 19 mm of 35 x 7 class rotation resistant wire rope.
• Auxiliary Lighting and Convenience Package:
Includes superstructure
mounted amber flashing beacon, dual base boom mounted LED work
lights controlled from cab and in-cab RCL light bar.
• 10,5 m–17,6 m manual bi-fold swingaway extension.
• 10,5 m–17,6 m hydraulic luffing extension.
• 360° positive swing lock.
• Rear pintle hitch.
• Cab-controlled cross axle differential locks (front and rear).
• Wind speed indicator.
• Boom mounted, boom position indicator light.
• Vertical RCL light tower.
• -30° C cold weather package.
• -40° C arctic weather package.
• Emergency stop buttons on each side of carrier.
• Second beacon light.
• Refinery package (certified spark ar engine air shutdown)
(T3 engine only).
• MAXbase - variable outrigger positioning system.
• Three camera package (rear-view, right side and hoists).
• Bluetooth/AM/FM radio.
• Heated seat.
• CraneSTAR asset management system.
* Denotes optional equipment
