Page 18
Janus C4 Mini PC
If you are using the Janus C4 Mini PC, it comes with Janus C4 already installed and
ready to use, however it is unlikely that the Mini PC will come with the network settings
relevant to your installation.
Please complete the below steps before adding a controller
Changing the Network Settings of the Janus C4 Mini PC
1.
On the Janus C4 mini-PC navigate to the Control Panel > Network and Internet >
Network Connections and alter the IPv4 address of the mini-PC ensuring IP, Subnet
and Gateway is all relevant to your installation.
2.
Open up the Janus C4 software on the mini-PC, login and go to Navigation >
Devices and select Janus Advance (Global) and the General Settings tab
Change the FirmwareUrl address to the new IP address: http://xxx.xxx.xxx.xxx/
firmware (where xxx.xxx.xxx.xxx is the new IP address of the Janus C4 server).
