Page 11
Setting up
MAC ADDRESS
0001CE20001
ADV-C2-MLT-00000001
ADVANCE
Load/Clear
Status
Reset
!
!
12V 5A MAX
RS-485
A B S
Optical
Tamper
Once power is applied to the controller
it will be visible to the Janus C4
Configurator application.
Attach the case to the wall in the desired
location.
The optical tamper will operate as soon as
the case is closed.
1
1
Install the lithium polymer back-up battery
if required.
The battery ensures operation of equipment
during power outage. Note that data is
retained even without a battery fitted.
2
2
Connect the IP and RS485 cable as
required. Note that to configure RS-485
controllers an IP connection must first be
used.
If using PoE, IP connection will apply power
to the controller.
3
3
Connect a suitable 12V external power
supply, if required.
If using PoE there is no need to follow this
step.
4
4
Need more information?