Model T27577 (Mfd. Since 3/16)
-15-
SECTION 4: ACCESSORIES
ACCESSORIES
Installing unapproved accessories may
cause machine to malfunction, resulting in
serious personal injury or machine damage.
To reduce this risk, only install accessories
recommended for this machine by Grizzly.
NOTICE
Refer to our website or latest catalog for
additional recommended accessories.
order online at
www.grizzly.com
or call
1-800-523-4777
Figure 19. Miter framing V-nail.
T27578—5mm V-Nails, 6,000 Per Box
T27579—7mm V-Nails, 6,000 Per Box
T27580—10mm V-Nails, 6,000 Per Box
T27581—12mm V-Nails, 6,000 Per Box
T27582—15mm V-Nails, 6,000 Per Box
Always have the correct V-nail size on hand! Each
size features a glued edge to keep each v-nail
strip together for consistent results.
Figure 20. H7478 Incra® MITER EXPRESS.
H7478—Incra® MITER EXPRESS
This sled is a sliding, miter-cutting platform
that fully supports and controls your workpiece
throughout the cut. Miter gauges drag your board
across the table, a sled slides the workpiece giv-
ing more support and control creating better, more
consistent cuts. The Miter Express is designed to
let you instantly drop and lock your miter gauge
into the sliding platform. Once docked, it stays put
until you undock it to switch back to your regular
miter gauge. Note: Miter gauge shown in photo is
sold separately.
H5688—Center Square Set of 6
This Stainless Steel Center Square Set comes
with just about all you need to layout your machin-
ing jobs. Includes 6” scale with inch and metric
measurements, 2” center square, scribe and 1
each 2
3
⁄
4
”, 4, 4
3
⁄
4
” and 7” squares. Custom fitted
case.
Figure 21. H5688 Center Square Set.
Summary of Contents for T27577
Page 32: ......
