Grizzly MTS 30-10 E2, Translation Of The Original Instructions For Use

Page: 106 / 196

106
GB
Changing the Fuel Filter
(Picture 14)
Never operate the equipment
without a fuel filter. Change the
fuel filter regularly.
1. Drain the fuel tank (2) into an appro-
priate container.
2. Pull the fuel suction head (50) out of the
tank with a hook and turn to pull it off.
3. Replace the fuel filter and place the
removed suction head back in the tank
pic. 14
2
50
Adjusting the Carburettor
The carburettor is preset in the factory for
optimal performance. If subsequent ad -
justments are required, have them carried
out by a specialist workshop.
Maintenance intervals
Machine Part Action
Before
Each Use
Operating Hours
10 20
Screws, nuts, bolts Check, tighten

Air filter Clean or replace

Fuel filter Replace

Spark plug Clean/adjust/replace

Fuel hoses Check, replace if necessary

Complete machine Check, clean if necessary

Operating handle Check for function

Cutting head Check correct installation
