-24-
h7583 tenoning Jig
SEcTION 5: MaINTENaNcE
For optimum performance from your tenoning jig,
follow this maintenance schedule and refer to any
specific instructions given in this section.
before Operation check:
•
loose locks or stop bolts.
•
damaged or worn saw blade.
•
Worn or damaged table saw wires.
•
Any other unsafe condition.
after Operation Maintenance:
•
Clean the tenoning jig.
•
lubricate the jig pivot points.
Schedule
Cleaning the Model h7583 is relatively easy.
Clean off the wood chips and sawdust, then wipe
off the remaining dust with a dry cloth. if any resin
has built up, use a resin dissolving cleaner to
remove it. treat all unpainted cast iron with a non-
staining rust-protectant after cleaning.
cleaning
Lubrication &
Storage
After thoroughly cleaning the tenoning jig, use a
light machine oil to lubricate all of the pivot points
on the jig, then wipe away the excess to avoid
sawdust build-up at these locations.
When not in use, store the jig on a flat, dry surface
that is protected from adverse elements. Cover
the jig to prevent dust build-up between uses.
always disconnect power
to the table saw before
performing adjustments,
maintenance, or service
to the saw or tenoning
jig. failure to do this may
result in serious personal
injury.