Model G1015 (Mfg. since 7/99)
-11-
SECTION 3: SETUP
The following are needed to complete the setup
process, but are not included with your machine.
Description Qty
•
Safety Glasses ........................................... 1
•
Cleaner/Degreaser (
Page 13) .... As Needed
•
Disposable Shop Rags ............... As Needed
•
Hex Wrench 4mm ....................................... 1
•
Hex Wrench 5mm ....................................... 1
•
Hex Wrench 6mm ....................................... 1
•
Dead-Blow Hammer ................................... 1
•
Mounting Hardware (
Page 15) ... As Needed
Needed for Setup
Your machine was carefully packaged for safe
transportation. Remove the packaging materials
from around your machine and inspect it. If you
discover the machine is damaged, please imme-
diately call Customer Service at (570) 546-9663
for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, inventory the contents.
Unpacking
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Wear safety glasses during
the entire setup process!
HEAVY LIFT!
Straining or crushing injury
may occur from improperly
lifting machine or some of
its parts. To reduce this risk,
get help from other people
and use a forklift (or other
lifting equipment) rated for
weight of this machine.
SUFFOCATION HAZARD!
Keep children and pets away
from plastic bags or packing
materials shipped with this
machine. Discard immediately.
Summary of Contents for G1015
Page 15: ...Model G1015 Mfg since 7 99 13 5mm Hardware Recognition Chart...
Page 40: ......
