Grizzly G1015, Owner'S Manual

Page: 30 / 40

-28-
Model G1015 (Mfg. since 7/99)
Symptom Possible Cause Possible Solution
Sanding belt makes
grinding noise
during operation. 1. Belt rubbing against wheel housing.
2. Tool rest rubbing against belt.
3. Graphite coating on platen worn out.
4. Idler wheel bearing worn out.
1. Adjust upper wheel guard; correctly adjust belt
tracking ( Page 21).
2. Adjust tool rest away from belt no more than 1 ⁄
8
".
3. Replace platen.
4. Replace bearing and idler wheel.
Pivot arm hard to
move. 1. Pivot arm set screws tight.
2. Pivot arm bushing not lubricated.
1. Loosen pivot arm set screws before rotating the arm
(
Page 23).
2. Lubricate the bushing arm bushing ( Page 25).