manualshive.com logo in svg

Grizzly G0949G, Owner'S Manual

The Grizzly G0949G Owner's Manual is an essential resource for users of this powerful product. With detailed instructions and important safety information, this manual ensures optimal performance and longevity. Download it for free from our website, manualshive.com, to enhance your experience with the Grizzly G0949G.

Share
Download
background image

-8-

Model G0949G (Mfd. Since 01/22)

The information contained herein is deemed accurate as of 7/7/2022 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 1 OF 3

Model G0949G

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

MODEL G0949G 12" X 35" VARIABLE‐SPEED GUNSMITH

LATHE

Product Dimensions:

Weight.............................................................................................................................................................. 772 lbs.

Width (side-to-side) x Depth (front-to-back) x Height..................................................................... 65 x 30-1/2 x 53 in.

Footprint (Length x Width)..................................................................................................................... 58-1/2 x 15 in.

Shipping Dimensions:

Carton #1

Type................................................................................................................................................ Wood Crate

Content................................................................................................................................................. Machine

Weight.................................................................................................................................................... 717 lbs.

Length x Width x Height............................................................................................................. 65 x 30 x 30 in.

Must Ship Upright......................................................................................................................................... Yes

Carton #2

Type................................................................................................................................................ Wood Pallet

Content...................................................................................................................................................... Stand

Weight.................................................................................................................................................... 133 lbs.

Length x Width x Height............................................................................................................. 32 x 24 x 20 in.

Must Ship Upright......................................................................................................................................... Yes

Electrical:

Power Requirement........................................................................................................... 110V, Single-Phase, 60 Hz

Full-Load Current Rating........................................................................................................................................ 15A

Minimum Circuit Size.............................................................................................................................................. 20A

Connection Type....................................................................................................................................... Cord & Plug

Power Cord Included.............................................................................................................................................. Yes

Power Cord Length.............................................................................................................................................. 60 in.

Power Cord Gauge......................................................................................................................................... 14 AWG

Plug Included.......................................................................................................................................................... Yes

Included Plug Type................................................................................................................................................ 5-15

Switch Type.............................................................................................................................. START/STOP Buttons

Motors:

Main

Horsepower............................................................................................................................................. 1.5 HP

Phase............................................................................................................................................ Single-Phase

Amps............................................................................................................................................................ 15A

Speed................................................................................................................................................ 3400 RPM

Type.............................................................................................................................................. DC Brushless

Power Transfer ............................................................................................................................................ Belt

Bearings..................................................................................................... Shielded & Permanently Lubricated

Summary of Contents for G0949G













































































































Reviews:

No comments

Related manuals for G0949G

Grizzly G8691 Instruction Manual preview
G8691
Brand: Grizzly Pages: 21
Grizzly G8690 Owner'S Manual preview
G8690
Brand: Grizzly Pages: 28
Grizzly G5979 Instruction Manual preview
G5979
Brand: Grizzly Pages: 32
Grizzly G4003 Owner'S Manual preview
G4003
Brand: Grizzly Pages: 60
Grizzly G4002 Owner'S Manual preview
G4002
Brand: Grizzly Pages: 64
Grizzly G9247 Instruction Manual preview
G9247
Brand: Grizzly Pages: 14
Grizzly T25920 Owner'S Manual preview
T25920
Brand: Grizzly Pages: 48

Brands by name

Popular brands

Load more brands