Model G0850 (Mfd. Since 01/19)
-45-
4. Have assistant available as needed during
following steps.
5. Loosen (6) knob bolts securing inner and
outer filter mufflers (see
Figure 84).
6. Remove (3)
5
⁄
16
"-18 x
3
⁄
4
" hex bolts and (3)
5
⁄
16
"
fender washers that secure outer filter muffler
to impeller housing, then remove outer filter
muffler (see
Figure 84).
3. Release bag clamp and pull each filter bag off
canister filter (see
Figure 83).
IMPORTANT: To contain wood dust and
minimize exposure risk, firmly tie bag closed.
Figure 83. Location and attachment of filter
bags.
Filter
Bag
Bag
Clamp
Figure 84. Fasteners for outer filter muffler.
x 3
x 6
8. Remove (3) knob bolts that secure canister
filter to impeller housing (see
Figure 86),
then carefully pull filter straight down to clear
filter cleaning brush assembly.
9. Repeat Steps 7–8 to remove second canister
filter.
10. Use shop vacuum to clean dust from inside
impeller housing and surface of machine.
11. Reverse Steps 3–9 to re-assemble.
Figure 86. Three knob bolts secure each
canister filter to impeller housing.
x 3
7. Remove (2)
1
⁄
4
"-20 lock nuts, (2)
1
⁄
4
"-20 x 1"
hex bolts, and (4)
1
⁄
4
" flat washers that secure
filter cleaning brush assembly to bracket on
bottom of canister filter (see
Figure 85).
Figure 85. Filter cleaning brush assembly
attached to canister filter.
Filter Cleaning Brush Assembly
x 2
Bracket
Summary of Contents for G0850
Page 56: ......
