-24-
Model G0850 (Mfd. Since 01/19)
52. Attach control panel conduits to upper legs
with (4) plastic retaining clips and (4) 10-24 x
1
⁄
2
" Phillips head screws (see
Figure 44).
Figure 44. Conduits secured with retaining clips.
x 4
54. Place (1) collection drum vacuum ring inside
each collection drum, with inside of ring fac-
ing down (see
Figure 46).
55. Attach handle to collection drum using (2)
13mm external retaining rings (see
Figure
47). Repeat for second collection drum.
56. Place 22" x 38" dust bag inside each collec-
tion drum.
57. To connect collection drum to machine, lift
drum handle and push drum in to align han-
dle tabs with slots on legs. Push drum handle
down to engage lock handle (see
Figure 48).
Note: When collection drums are properly
secured, drum casters will lift off floor. To
remove collection drum, lift drum handle to
release lock handle.
53. Install (4) 2" swivel ball casters on bottom of
each collection drum and secure each caster
with (1)
3
⁄
8
"-16 hex nut (see
Figure 45).
Figure 45. 2" caster installed on collection drum.
Figure 47. Installing collection drum handle.
Handle
Figure 48. Collection drums secured to machine.
Drum
Handle
Slots
Lock Handle
Figure 46. Collection drum vacuum ring
installed.
Collection Drum Vacuum Ring
x 2
Summary of Contents for G0850
Page 56: ......
