-18-
Model G0850 (Mfd. Since 01/19)
11. Place right front upper leg in right leg brace
so warning labels face outward, as shown in
Figure 19, then attach with (2)
5
⁄
16
"-18 x
3
⁄
4
"
hex bolts and (2)
5
⁄
16
" fender washers. Finger-
tighten for now.
Figure 19. Right front upper leg installed with
warning labels facing outward.
x 2
12. Place right rear upper leg with two threaded
10-24 holes facing forward in right leg brace
and attach using (2)
5
⁄
16
"-18 x
3
⁄
4
" hex bolts
and (2)
5
⁄
16
" fender washers (see
Figure 20).
Finger-tighten for now.
Figure 20. Right rear upper leg installed with
10-24 screw holes facing forward.
x 2
13. Attach upper center leg to lower center leg
bracket with (2)
5
⁄
16
"-18 x
3
⁄
4
" hex bolts and (2)
5
⁄
16
" fender washers (see
Figure 21). Finger-
tighten for now.
14. Attach upper center leg bracket to upper cen-
ter leg (see
Figure 22) with (2)
5
⁄
16
"-18 x
3
⁄
4
"
hex bolts and (2)
5
⁄
16
" fender washers. Finger-
tighten for now.
Figure 22. Upper center leg bracket installed.
x 2
Upper
Center Leg
Figure 21. Upper center leg installed.
x 2
Upper
Center Leg
15. Secure (4) 60mm M16-2 x 27 eye bolts in
impeller housing where shown in
Figure 23.
Figure 23. Impeller housing eye bolt locations.
x 4
Right Front
Upper Leg
w/Warning
Labels
Right Leg
Brace
Threaded
10-24 Holes
Face Forward
Right Leg
Brace
Right
Rear
Upper
Leg
Lower Center
Leg Bracket
Upper Center
Leg Bracket
Summary of Contents for G0850
Page 56: ......
