-44-
Model G0850 (Mfd. Since 01/19)
Removing/Replacing
Canister Filters
Items Needed Qty
An Assistant ...................................................... 1
Wrench or Socket 10mm ................................... 1
Wrench or Socket 12mm ................................... 1
Socket
7
⁄
16
" ......................................................... 1
Canister Filter T28920 ....................................... 2
Filter Bag T28925 .............................................. 2
Safety Goggles (Per Person) ............................. 1
Respirator (Per Person) ..................................... 1
Shop Vacuum .................................................... 1
To remove & replace canister filters:
1. DISCONNECT MACHINE FROM POWER!
2. Put on safety goggles and respirator.
If the canister filters are clogged or dirty and
cleaning or washing them does not improve
dust-collection performance, replace the canister
filters.
For a more thorough cleaning every few months
under heavy use, wash the filters by hand.
To wash canister filters by hand:
1. DISCONNECT MACHINE FROM POWER!
2. Remove canister filters (see Removing/
Replacing Canister Filters on This Page).
3. Rinse filters outside under warm water.
IMPORTANT: DO NOT use a pressure
washer to clean the filters, or compressed air
to dry them. High pressure will damage filter
fibers.
4. Allow filters to air dry only.
Note: Do not leave filters in the sun to dry or
apply heat to speed the process; heat expo-
sure can damage your filters.
5. Re-install canister filters.
Washing Canister
Filters
Dust exposure created
while using machinery
may cause cancer, birth
defects, or long-term respi-
ratory damage. Always
wear goggles and a NIOSH-
approved respirator when
working with the dust col-
lection bags or canisters.
Summary of Contents for G0850
Page 56: ......
