Model G0825 (Mfd. Since 02/17)
-19-
Setting Infeed Guide
Setting Guide Plate
The guide plate is adjustable for both height and
angle.
During operation, the guide plate slides across
the top of the workpiece to help ensure tape is
applied evenly and flush with top edge. The guide
plate height must be set to match the workpiece
thickness.
For typical operations, the guide plate must also
be set 90° to the feed rollers. Specific operations
may require adjusting the angle of the guide plate
(see
Figure 15). The angle is shown on the scale
at the base of the guide-plate post. The angle
scale allows the guide plate to be accurately
adjusted to +/-15°.
The infeed guide controls the height of the edge-
banding tape to ensure it gets applied flush with
the top of the workpiece. In order to function
properly, the infeed guide must be set at the same
height as the guide plate, which slides across the
top of the workpiece during operation.
The numbers on the guide scale correspond to
the edgebanding width (in millimeters). Adjust the
infeed guide to the correct edgebanding width.
Figure 14. Infeed guide adjustment components.
Infeed-Guide
Lock Knob
Guide
Scale
Infeed
Guide
Workpiece
Guide Plate
Roller
+/-15
o
Figure 15. Infeed guide adjustment components.
Summary of Contents for G0825
Page 44: ......
