Grizzly G0821, Owner'S Manual

Page: 6 / 52

-4-
Model G0821 (Mfd. Since 03/18)
Controls &
Components
A. Fence: Supports workpiece laterally as it
moves across cutterhead; determines angle
of cut when edge or bevel joining.
B. Cutterhead Guard: Covers cutterhead until
pushed aside by workpiece during operation.
When workpiece leaves cutterhead, guard
springs back to its starting position. DO NOT
operate jointer if guard is not functioning
properly.
C. Infeed Table: Supports workpiece before it
reaches cutterhead. Height of infeed table
determines depth of cut.
D. Infeed Table Adjustment Knob: Adjusts
height of infeed table, which determines
depth of cut.
E. ON/OFF Switch w/Disabling Key: Turns
motor ON when flipped up; turns motor OFF
when pressed down. Removal of yellow key
disables switch so motor cannot start.
F. Outfeed Table: Supports workpiece after it
passes over cutterhead. For optimum cutting
results and safe operation, outfeed table must
be properly adjusted even with highest point
or TDC (Top Dead Center) of cutterhead
inserts.
Refer to
Figures 1–3 and the following descrip-
tions to become familiar with the basic controls
and components of this machine. Understanding
these items and how they work will help you
understand the rest of the manual and stay safe
when operating this machine.
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
Component Descriptions
Figure 1. Main table controls.
A
B
C
D
E
F