Model G0821 (Mfd. Since 03/18)
-35-
Fence
Place one or two drops of light machine oil on
fence pivot points (see
Figure 54) as needed.
Figure 54. Fence lubrication locations.
Lubrication
Leadscrew
Lubricate with light machine oil as needed (see
Figure 53). Wipe off excess oil and sawdust with
a cloth.
Figure 53. Leadscrew lubrication location.
Since all bearings are sealed and permanently
lubricated, simply leave them alone until they
need to be replaced. DO NOT lubricate them.
It is essential to clean components before lubri-
cating them because dust and chips build up on
lubricated components and make them hard to
move.
Clean the components below with mineral spirits
and shop rags.
Summary of Contents for G0821
Page 52: ......
