-34-
Model G0821 (Mfd. Since 03/18)
SECTION 6: MAINTENANCE
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
Schedule
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily
•
Vacuum all dust on and around the machine.
•
Empty debris from the dust collection bag.
DO NOT use the jointer if debris obstructs the
flow of material into the bag. Using the jointer
when the chute is obstructed can lead to
jointer malfunction and, possibly, fire. Failure
to heed this warning can result in serious
personal injury.
•
Wipe down the tables and all other unpainted
cast iron with a metal protectant.
•
Check/repair for worn or damaged wires
(
Page 42).
•
Check/replace damaged cutterhead or inserts
(
Page 35).
•
Check/retighten loose mounting bolts.
•
Check/resolve any other unsafe condition.
Monthly
•
Check belt for proper tension, damage, or
wear (
Page 38).
•
Clean/vacuum dust buildup from inside stand
and off of motor.
Cleaning &
Protecting
Figure 52. Recommended products for
protecting unpainted cast iron/steel.
G5562—SLIPIT® 1 Qt. Gel
G5563—SLIPIT® 12 Oz. Spray
G2871—Boeshield® T-9 12 Oz. Spray
G2870—Boeshield® T-9 4 Oz. Spray
H3788—G96® Gun Treatment 12 Oz. Spray
H3789—G96® Gun Treatment 4.5 Oz. Spray
Cleaning the Model G0821 is relatively easy.
Vacuum excess wood chips and sawdust, and
wipe off the remaining dust with a dry cloth. If any
resin has built up, use a resin dissolving cleaner
to remove it.
Protect the unpainted cast-iron table by wiping
it clean after every use—this ensures moisture
from wood dust does not remain on bare metal
surfaces. Keep the table rust-free with regular
applications of products like G96
®
Gun Treatment,
SLIPIT
®
, or Boeshield
®
T-9 (see below for more
details).
Summary of Contents for G0821
Page 52: ......
