Model G0819 (Mfd. Since 09/16)
-5-
Controls &
Components
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
Refer to the following figures and descriptions to
become familiar with the basic controls and com-
ponents of this machine. Understanding these
items and how they work will help you understand
the rest of the manual and minimize your risk of
injury when operating this machine.
Control Panel
A
B
C
D
E
F
G
Figure 4. Control panel components.
A. Amp Load Meter: Indicates current amp
load on main motor during sanding operation.
B. Sanding Belt Start Button: Turns main
motor
ON when pressed.
C. Conveyor Belt Start Button: Turns feed
motor
ON when pressed.
D. Power Indicator: Illuminates when machine
is connected to power.
E. Sanding Belt Stop Button: Turns main
motor
OFF when pressed.
F. Conveyor Belt Stop Button: Turns feed
motor
OFF when pressed.
G. Emergency Stop Button: Turns all machine
functions
OFF when pressed; engages emer-
gency brake to stop rotation of sanding drum.
Twist clockwise to reset.
H. Table Extension: Adjusts in and out to pro-
vide additional support for workpieces that
are wider than conveyor table.
I. Conveyor Belt: Feeds workpiece across
conveyor table during sanding operations.
J. Workpiece Thickness Scale: Indicates
thickness of finished workpiece.
K. Conveyor Table: Supports workpiece dur-
ing operations; can be raised and lowered
according to workpiece thickness.
L. Table Elevation Handwheel: Raises and
lowers conveyor table (K). Rotate clockwise
to lower table; rotate counterclockwise to
raise table. One full rotation moves the table
approximately 0.20".
M. Emergency Stop Plate: Stops all machine
functions when pressed; engages emergency
brake to stop rotation of sanding drum.
Feed Rate Chain
N. Feed Rate Pressure Chain: Enables one of
three feed rates: 16.4, 23, and 32.8 FPM.
Figure 6. Feed rate chain location.
N
Table
Figure 5. Table components.
H
J
L
M
I
K
Summary of Contents for G0819
Page 84: ......
