Model G0736/G0737 (Mfd. Since 3/14)
-43-
Do not apply any grease on the trunnions
underneath the table. These cast iron parts
create their own dry lubricant with use.
Applying grease will create a mixture that
will interfere with the smooth movement of
the table.
Variable Speed Pulley Shaft
1. Open the motor access door, and use shop
rags and mineral spirits to clean away any
grease or grime from the pulley shaft grease
fitting (see
Figure 57). This will ensure the
new grease is not contaminated.
2. Use a grease gun to add 2-4 pumps of
NLGI#2 grease or equivalent to the fitting.
3. Wipe away any excess grease from the fitting
or pulley.
4. Close and secure the motor access door.
Air Pump
1. Open the motor access door.
2. Add four drops of quality air tool oil to the
fitting on the right side of the pump (see
Figure 58).
3. Clean away any oil from outside the air pump,
bandsaw frame, or floor.
4. Close and secure the motor access door.
Figure 57. Variable speed pulley grease fitting.
Pulley Shaft
Grease Fitting
Figure 58. Air pump oil fitting.
Air Pump
Add Oil Here
Summary of Contents for G0736
Page 72: ......
