-14-
Model G0736/G0737 (Mfd. Since 3/14)
SECTION 3: SETUP
Your machine was carefully packaged for safe
transportation. Remove the packaging materials
from around your machine and inspect it. If you
discover any damage, please call us immediately
at (570) 546-9663 for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, inventory the contents.
Unpacking
SUFFOCATION HAZARD!
Keep children and pets away
from plastic bags or packing
materials shipped with this
machine. Discard immediately.
The following are needed to complete the setup
process, but are not included with your machine.
Description Qty
•
Additional People ........................................ 1
•
Safety Glasses ................. 1 for Each Person
•
Cleaner/Degreaser ...................... As Needed
•
Disposable Shop Rags ................ As Needed
•
Forklift (rated for at least 1000 lbs.) ............. 1
•
Safety Hook & Chain
(rated for at lease 1000 lbs. each) ......1 Each
•
Floor Mounting Hardware
5
⁄
8
" ...... As Needed
Needed for Setup
Setup Overview
The purpose of the setup section is to help you
prepare your machine for operation. The list below
outlines this basic process. Specific steps for
each of these points will be covered in detail later
in this section.
The bandsaw is a complex machine that requires
a number of adjustments to operate safely and
efficiently. Be sure to perform all of the instruc-
tions in this section in sequence.
The typical setup process is as follows:
1. Unpack the bandsaw and inventory the loose
components.
2. Clean the bandsaw and its components.
3. Move the bandsaw to an acceptable loca-
tion.
4. Tension the blade.
5. Check/adjust the blade tracking.
6. Check/adjust the blade guide assemblies.
7. Connect the bandsaw to the power source.
8. Test run the bandsaw to make sure it func-
tions properly.
Summary of Contents for G0736
Page 72: ......
