-18-
Model G0736/G0737 (Mfd. Since 3/14)
Lifting & Placing
This is a heavy machine.
Serious personal injury
may occur if safe moving
methods are not used. To
be safe, get assistance and
use powered lifting equip-
ment to move the ship-
ping crate and remove the
machine from the crate.
To lift and place the bandsaw:
1. Prepare the bandsaw operation site for
machine placement (refer to
Page 17) and
electrical connection (refer to
Page 11).
2. With the bandsaw still bolted to the shipping
pallet, move it to the operation site, then
unbolt the bandsaw from the pallet.
3. Attach the safety hook and chain between the
forklift and the bandsaw lifting eyebolt (see
Figure 13 for an example).
Figure 13. Example of using safety hook and
chain to lift the bandsaw.
4. With the help from another person to steady
the load, lift the bandsaw enough to clear the
pallet, remove the pallet, then slowly place
the bandsaw into position.
Assembly
Except for the fence, the bandsaw is fully assem-
bled at the factory.
Place the fence on the bandsaw table (see
Figure 14), then thread the lock knob bolt into the
provided hole to secure the fence to the table.
Important: Make sure that the table pin is
installed, as shown in
Figure 14. The table pin
prevents the front table halves from getting mis-
aligned when heavy workpieces are loaded on
the table.
Figure 14. Fence installed.
Fence
Lock Knob Bolt
Table Pin
Summary of Contents for G0736
Page 72: ......
