Model G0736/G0737 (Mfd. Since 3/14)
-25-
9. WITHOUT resetting the STOP button, press
the bandsaw START button. The machine
should not start.
—If the machine does start (with the STOP
button pushed in), immediately disconnect
power to the machine. The STOP button
safety feature is not working correctly. This
safety feature must work properly before
proceeding with regular operations. Call
Tech Support for help.
10. Reset the STOP button, then turn the weld-
ing power switch on the welding station (see
Figure 31) to the ON position. The welding
power lamp should illuminate.
—If the welding power lamp does not illumi-
nate, immediately disconnect power to the
machine and call Tech Support for help.
11. Stay clear of the grinding wheel then turn it
ON and OFF to verify that the wheel spins
when powered on.
12. Turn the welding station power switch OFF.
Congratulations! You have completed the setup
and test run procedures. The bandsaw is now
ready for operations.
Figure 31. Welding station.
Welding
Power
Switch
Welding Power Lamp
Grinding
Wheel
Toggle
Switch
Summary of Contents for G0736
Page 72: ......
