Grizzly G0736, Owner'S Manual

Page: 23 / 72

Model G0736/G0737 (Mfd. Since 3/14)
-21-
Adjusting Blade
Guide Assemblies
The blade guide assemblies were properly adjust-
ed at the factory; however, due to the vari-
ables involved with shipping, we recommend that
you check the blade guide assemblies. Properly
adjusted blade guide assemblies are essential
to making accurate cuts because they keep the
blade supported during operation, which prevents
the blade from wandering.
The blade guide assemblies help to keep the
blade straight while cutting. Use
Figures 20–22`
and the following descriptions to better understand
the components of the blade guide assembly.
Blade Support
Blade
Guide
Blade Guide
Adjustment
Cap Screw
Side
View
Blade
Guide
Bracket
Guide
Post
Blade Guide
Adjustment
Set Screw
Blade Support
Adjustment
Set Screw
Blade
Figure 22. Upper blade guide components.
Note: Both the upper and lower blade guide
assemblies are adjusted in the same manner. To
access the lower assembly, you will need to first
remove the lower blade guards.
Blade Guides: Support the blade on both sides.
Blade Guide Bracket: Holds the blade guides.
Blade Support: Supports the blade from behind.
Blade Guide Adjustment Cap Screws: Secure
the blade guides in the proper position on both
sides of the blade.
Adjustment Set Screws: Secure the position of
the blade guide brackets and the blade supports.
Figure 21. Front view of upper blade guide
assembly.
Blade Guide
Blade Guide
Adjustment
Cap Screw
Figure 20. Blade guide assembly components.
Blade Guide
Bracket
Blade
Support
Blade Guide
Adjustment
Set Screw
Blade Support
Adjustment Set Screw