Model G0692 (Mfg. 11/08 and Later)
-23-
review the troubleshooting and procedures in this section to fix or adjust your machine if a problem devel-
ops. if you need replacement parts or you are unsure of your repair skills, then feel free to call our technical
support at (570) 546-9663.
SECTiON 7: SERviCE
Troubleshooting
Motor & Electrical
symptom
possible Cause
Corrective action
Machine
does
not start/indicator
light does not
come on or a
breaker trips.
1. plug/receptacle is at fault or wired incorrectly.
2. Wall fuse/circuit breaker is blown/tripped.
3. power supply switched
off or is at fault.
4. Wiring is open/has high resistance.
5. Motor on/oFF switch is at fault.
6. Motor is at fault.
1. test for good contacts; correct the wiring.
2. ensure circuit size is suitable for this machine;
replace weak breaker.
3. ensure power supply is switched
on; ensure power
supply has the correct voltage.
4. Check for broken wires or disconnected/corroded
connections, and repair/replace as necessary.
5. replace faulty on/oFF switch.
6. test/repair/replace.
Machine stalls or
is overloaded.
1. Motor connection is wired incorrectly.
2. plug/receptacle is at fault.
3. Motor is at fault.
1. Correct motor wiring connections (
page 27).
2. test for good contacts; correct the wiring.
3. test/repair/replace.
Machine
has
vibration or noisy
operation.
1. Motor or component is loose.
2. Motor mount loose/broken.
3. Machine sits unevenly.
4 Motor fan is rubbing on fan cover.
5. Motor bearings are at fault.
1. inspect/replace stripped or damaged bolts/nuts, and
re-tighten with thread locking fluid.
2. tighten/replace.
3. relocate/shim machine.
4. replace dented fan cover; replace loose/damaged
fan.
5. test by rotating shaft; rotational grinding/loose shaft
requires bearing replacement.
indicator light is
on and trigger
switch fails to
activate motor.
1. plug connecting trigger switch to control box is
unplugged.
2. trigger switch at fault.
3. Motor is at fault.
1. Correctly insert plug.
2. test/repair/replace.
3. test/repair/replace.
Summary of Contents for G0692
Page 36: ......