Grizzly G0692, Owner'S Manual, Page: 11 / 36

Model G0692 (Mfg. 11/08 and Later)
-9-
figure 2. typical 1-15 plug and 5-15 receptacle.
5-15 Receptacle
1-15 Plug
Neutral
Hot
110v Operation
full Load Amperage Draw
this machine draws the following amps under
maximum load:
amp draw .............................................. 15 amps
power Supply Circuit Requirements
the power supply circuit for your machine Must
be grounded and rated for the amperage given
below. never replace a circuit breaker on an exist-
ing circuit with one of higher amperage without
consulting a qualified electrician to ensure compli-
ance with wiring codes.
if you are unsure about
the wiring codes in your area or you plan to
connect your machine to a shared circuit, con-
sult a qualified electrician.
Minimum Circuit size .............................20 amps
Extension Cords
We do not recommend using extension cords, but
if you find it absolutely necessary:
• use at least a 14 gauge cord that does not
exceed 50 feet in length!
• a qualified electrician Must size cords over
50 feet long to prevent motor damage.
SECTiON 2: CiRCUiT REQUiREMENTS
Serious personal injury could occur if you
connect the machine to power before com-
pleting the setup process. DO NOT connect
the machine to the power until instructed
later in this manual.
Electrocution or fire could
result if machine is not
installed in compliance
with electrical codes.
Compliance MUST be veri-
fied by a qualified electri-
cian!
power Connection Device
the Model g0692 comes with a neMa 1-15 plug,
similar to
figure 2, to connect the machine to
power.